|  |
|
|  | |
- Designed for small boat operation. Powered by two 12 volt batteries.
-
- 3” and 2” cores. Aluminum 3” core tube lengths from 2 to 20-foot for grain size and soil mechanics.
- Stainless and plastic core tubes for trace metals and pesticides.
-
- Takes nearly perfectly undisturbed cores up to 20 feet long in up to 140 foot water depths.
-
- Core tubes are easy to cut and sealed for transport and storage
-
- SDI Core Keepers for very soft or sandy sediments.
-
- Integral top vent and seal helps retain soft sediment samples.
-
- Quick-change and long-life core tube mount pins make core tube mounting a simple operation.
-
- Float and weight VibeCore guide available for difficult or congested core sites
-
- Simple and safe low-voltage operation from car batteries eliminates the need for a generator or air compressor
- onboard a small boat.
-
- Install core catchers as needed. No Core Liner required.
-
-
- Feature
- VibeCore-D
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- Supplies available from SDI include ;
- Keepers, graduated core pushers, core cutters, core splitters, core caps,
- tube adapters, sample jars and containers, sampling tools
-
|
 | | | | |
- Input Voltage
| - 20 - 28 VDC
|
- Normal Active Time per core sample
| - 1 - 2 minutes
|
- Active time per 80 AH Battery
| 160 Minutes |
- Estimated Cores per battery set
| >75 |
- Operating Frequency
| 5000 - 7000 cpm |
- Working Water Depth (ft.)
| 100ft. (140ft. optional) |
- Core Head Dimensions (in.)
| 10 1/4 long x 14 wide x 23 high |
- Core Tube Materials
| - Aluminum, PVC, Acrylic, Polycarbonate, Stainless Steel
|
- Core Tube Diameter
| - 3” nominal
|
- Core tube wall
| - 0.050” (typical)
|
Air Weight (core head) | 77 lbs. |
in-Water Weight (core head) | 24 lbs. |
Shipping Weight | 120 lbs. |
Add-on Weights | Up to 2 @ 20lbs |
Operating Temperature | 2 - 45 C |
Storage Temperature | -20 - 60 C |
Navigation, Bathymetry, Sub-bottom profiling /Sediment Mapping and Vibracoring all from 12 foot Jon Boats.
Vibecore at 70 degrees North Latitude
